ARLINGTON, SD<\/b> \u2013 If you own a GMRS-PRO or UV-PRO from BTECH, the new 0.8.3 firmware update is worth your attention and comes packed with fixes and improvements. One of the biggest highlights is the UV-PRO\u2019s refreshed display, which is much easier to read in direct sunlight. Both radios also get a fix for a stubborn receive problem that showed up when NOAA alerts were enabled. This bug sometimes caused weaker reception and odd scanning behavior. It\u2019s finally gone, and the radios now handle NOAA alerts the way they were always meant to. Below, you\u2019ll find a full breakdown of what\u2019s changed and why it matters.<\/strong><\/p>\n Reading your UV-PRO\u2019s screen outside is a lot simpler now. The display colors have been optimized, and the font has been tweaked for better clarity. If you regularly use your UV-PRO in bright or sunny conditions, you\u2019ll notice the difference as soon as you power it on. There\u2019s no complicated setup needed\u2014just install the new firmware, and you\u2019re good to go.<\/p>\n Both the GMRS-PRO and UV-PRO had a tricky bug that lowered receive performance when NOAA alerts were switched on. In some cases, the radios would detect a signal then jump to another channel too soon. This caused the squelch to act strangely and made you miss broadcasts. BTECH dug into the problem and discovered an issue could trigger a premature channel switch. Now both radios handle NOAA alerts correctly. You should see a smoother experience when monitoring for NOAA alerts in the background.<\/p>\n Both models add Busy Channel Lockout (BCL). This feature prevents you from transmitting on a channel that\u2019s already in use. It\u2019s a straightforward way to avoid talking over someone else. You\u2019ll find a new setting in the Channel Editor to enable or disable BCL, so you have full control over when you want this safeguard turned on.<\/p>\n The Channel Editor for the UV-PRO has also been expanded to let you modify modulation modes. And with the new \u201cVFO Step\u201d option in the Radio Settings menu, you can fine-tune your frequency jumps when manually scanning frequencies.<\/p>\n If you switch between preset channels and VFO scanning, the new firmware makes it simpler. You can move directly to VFO channels from the channel-switching interface, which saves time and reduces button presses. There\u2019s also an update to \u201cFrequency Sync Rapid Scan,\u201d allowing you to make detailed adjustments and save those results back to VFO without extra steps.<\/p>\n Another feature for the UV-PRO is the enhanced DTMF input interface. It can now show text feedback on the screen, so you know exactly what you\u2019re typing in real time. This helps ensure you don\u2019t make mistakes when sending DTMF tones for repeater or control applications.<\/p>\n You can update both the GMRS-PRO and UV-PRO through BTECH\u2019s mobile apps. If you have the GMRS-PRO, use the \u201cGMRS Programmer\u201d app; for the UV-PRO, use the \u201cUV Programmer\u201d app. Once you\u2019re in the correct app, look for the Update Firmware option. The steps are straightforward, but here are a few tips to keep in mind:<\/p>\n Once your radio is back on, double-check your settings and channels. It shouldn\u2019t take long to get everything back the way you want. If you run into any trouble, BTECH\u2019s support team can walk you through additional steps.<\/p>\n<\/div>\n Thinking About a GMRS-PRO or UV-PRO?<\/b><\/b><\/p>\n If you\u2019ve been waiting to upgrade your radio setup, now\u2019s a good time. Both models support Bluetooth VOX for hands-free operation and come packed with advanced features like built-in GPS, text messaging, and APRS. The latest firmware update adds even more enhancements, so you can tackle daily communication or emergency situations with confidence.<\/p>\n We Value Your Feedback<\/b><\/b><\/p>\n We\u2019d love to hear about your experience with this new firmware. Any tips, discoveries, or suggestions you have will help us keep improving. When you share what works well\u2014or what could work better\u2014you\u2019re helping shape the future of our products.<\/p>\n BTECH: Built on Quality and Long-Term Support<\/b><\/b><\/p>\n At BTECH, we stay committed to giving you feature-rich radios that can handle real-world use. We keep older models current through firmware updates instead of leaving them behind. That way, your GMRS-PRO or UV-PRO stays on the leading edge of radio technology long after you first power it on.<\/p>\n About BTECH<\/b><\/b><\/p>\nUV-PRO Gets a Sharper, Sun-Friendly Display<\/b><\/h2>\n
Long-Standing NOAA Alert Bug Resolved<\/b><\/h2>\n
Busy Channel Lockout (BCL) and Channel Editor Upgrades<\/b><\/h2>\n
Faster Frequency Scanning and Improved VFO Handling<\/b><\/h2>\n
DTMF Enhancements<\/b><\/h2>\n
How to Update<\/h3>\n
\n
\nPurchase a UV-PRO<\/a><\/div>\n