The AMP- V25 will also work with any handheld radio that outputs 2W–6W with the appropriate connecting RF cable. The AMP‑V25 includes the SMA Female connecting cable to hook right up to BTECH and BaoFeng radios right out of the box.
Easily install in a home or mobile environment; the AMP‑V25 measures just 5.5" x 4.5" x 1.4" and weighs just 1.8lb making it the perfect companion for field operation without adding a lot of weight.
Cleaner Output Signal
Harmonic filters on the input allow the amplifier to transmit a cleaner output signal. The amplifier is so well engineered that in most circumstances it transmits a cleaner, purer signal then it receives from your handheld radio
The AMP-V25 includes voltage spike suppression, over-temperature protection, RF sensing, and automatic power control (APC) to protect it under adverse operating conditions.
Three Primary Modes of Amplification
Connect to the antenna output of the handheld transceiver to the RF-IN connector on the rear panel of the amplifier with the Radio to Amplifier RF cable. Transmit and receive right on the Handheld radio - while your output signal is amplified.
Connect to the antenna output of the handheld transceiver to the RF-IN connector on the rear panel of the amplifier with the Radio to Amplifier RF cable. Connect a speaker microphone, headset, or compatible accessory to the radio. Transmit and receive right on the accessory connected to the Handheld radio - while your output signal is amplified.
Connect the speaker microphone to the MIC jack on the front panel of the amplifier. Connect to the antenna output of the handheld transceiver to the RF IN connector on the rear panel of the amplifier with the Radio toAmplifier RF cable. Connect the accessory port of your radio to the CONTROL jack on the front panel of the amplifier using the Amplifier Control Cable. Transmit and receive using the speaker microphone on the amplifier while incoming audio is relayed through the loud amplifier speaker.
|Amplified Frequency Range||136 – 174 MHz||400 – 480 MHz||220 - 225 MHz||136 – 174 MHz||400 – 480 MHz|
|Input RF power||2 - 6W (±10%)||2 - 6W (±10%)||2 - 6W (±10%)||2 - 6W (±10%)||2 - 6W (±10%)|
|Output RF power||20 - 40W||20 - 40W||30 - 50W||20 - 40W||20 - 40W|
|Analog FM, P25 Phase 1, C4FM (System Fusion), NXDN, IDAS, dPMR, and MPT1327 modes||✔||✔||✔||✔||✔|
|DMR and P25 Phase 2 modes||✔||✔|
|Out-of-Band Transmit (Pass-through the HT's power to the external antenna while amp is powered off)||✔||✔||✔|
|External Antenna Connector||SO-239||SO-239||SO-239||SO-239||SO-239|
- Item Weight : 1.8 pounds
- Product Dimensions : 5.5 x 4.5 x 1.4 inches
- Item model number : AMP-V25
Easily extend the communication range of your handheld radio; Use the AMP-V25 to create: a mobile radio with a vehicle mounted antenna, a high power field radio with a field deployed antenna, a home/base radio attached to a mast. Your handheld radio connects in seconds and can just as easily disconnect and be taken on the go.
Kit Includes the necessary cables and interface connectors to easily connect to BTECH and BaoFeng Radios.
What's Included: Amp Body, Mobile Mounting Bracket & Screw set, Radio to Amplifier Antenna Cable (SMA Female to SMA Male), Control Cable (K1 to K1), User Manual, Speaker Microphone & Hanger
BaoFeng Tech is the only authorized BaoFeng & BTECH Distributor to honor the Manufacturer Warranty. Only BaoFeng Tech offers warranty claims without shipping anything to China. You must insure that BaoFeng Tech is your selected buying option when buying to be able to have the full USA warranty.