Firmware Update

GMRS-RPT50 Firmware V1.023R Now Available

Thursday, March 19, 2026 ARLINGTON, SD - BTECH today announced the release of Firmware V1.023R for the GMRS-RPT50 bringing a focused set of refinements that improve day-to-day repeater operation, display accuracy, and update clarity. This release releases primarily addresses a modulated hum heard with CTCSS tones in certain unique setups, corrects per-channel low/high power display behavior, and aligns the firmware on the repeater to display the actual version number.  Built on the V1.021R relaunched foundation These updates build on the major usability...

Category: Blog, NewsTags: , , , , Comments: 3

GMRS-RPT50 Firmware V1.021R Now Available: Reverse CTCSS for Cleaner Dropouts, Faster On-Site Setup

Tuesday, February 10, 2026 ARLINGTON, SD - BTECH today announced the release of Firmware V1.021R for the GMRS-RPT50, delivering a major refinement to on-air behavior and day-to-day usability. The update is led by a new Reverse CTCSS (Reverse Burst TX) option designed to reduce squelch tail noise at the end of transmissions, along with a reorganized front-panel menu system, improved on-screen feedback, and a redesigned CPS programming experience. Repeaters should sound clean and set up fast. Firmware V1.021R focuses on the moments...

Category: Blog, NewsTags: , , , , Comments: 0

BTECH introduces the DA-7X2. True Dual Receive. True VFO. Built to evolve.

Friday,  January 30, 2026 ARLINGTON, SD – BTECH today announced DA-7X2, a new dual-band handheld that treats “digital + analog” as a day-to-day reality, not a menu choice. DA-7X2 pairs true dual-receiver hardware (monitoring VHF and UHF at the same time) with a radio workflow that stays fast in the field: a dual-display Main/Sub layout, true VFO and full memory-channel operation, and on-radio adjustability that doesn’t assume you’re sitting at a desk.  The name is intentional. DA is about a broader...

Category: Blog, Dmr, NewsTags: , , , , , , , Comments: 2

UV-50PRO Firmware Changelog

This page lists official UV-50PRO radio firmware releases in reverse chronological order. Update tip: After flashing, if the screen does not power back on: unplug the radio from power → Press and hold the Menu button (the top left white button) → While holding the Menu button, reconnect power and turn the radio on (after releasing the reset will take about 1 minute). This will reflash the display firmware and restore normal operation. Best practice: After major updates, back up your...

Category: Blog, NewsTags: , , , Comments: 0

GMRS-50PRO Firmware Changelog

This page lists official GMRS-50PRO radio firmware releases in reverse chronological order. Update tip: After flashing, if the screen does not power back on: unplug the radio from power → Press and hold the Menu button (the top left white button) → While holding the Menu button, reconnect power and turn the radio on (after releasing the reset will take about 1 minute). This will reflash the display firmware and restore normal operation. Best practice: After major updates, back up your...

Category: Blog, NewsTags: , , , Comments: 0

GMRS-PRO Firmware Changelog

This page lists official GMRS-PRO radio firmware releases in reverse chronological order. Update tip: After flashing, if the screen does not power back on, power off → hold OK (top-left green key) → power on to initialize the new firmware. Best practice: After major updates, back up your channels, then perform a Factory Reset and re-sync using the BTECH GMRS Programmer app. V0.9.2 — January 29, 2026 New Radio Settings Update: Added a Reverse Frequency switch in Radio Settings. Programmable Buttons: New assignable actions: Squelch Level +, Squelch Level −,...

Category: Blog, NewsTags: , , , Comments: 0

UV-PRO Firmware Changelog

This page lists official UV-PRO radio firmware releases in reverse chronological order. Update tip: After flashing, if the screen does not power back on, power off → hold OK (top-left green key) → power on to initialize the new firmware. Best practice: After major updates, back up your channels, then perform a Factory Reset and re-sync using the BTECH UV Programmer app. V0.9.2 — January 29, 2026 New KISS Mode Enhancements: Configure TX and RX frequencies independently, and set TX power for the KISS profile. DTMF...

Category: Blog, NewsTags: , , , Comments: 2

BF-F8HP PRO Firmware V0.53 Is Live: Smarter Scanning, Better Airband, More Control

Friday,  January 23, 2026 ARLINGTON, SD – Firmware V0.53 for the BTECH BF-F8HP PRO is available now. and this update isn’t the usual “small fixes you’ll never see.” The very first thing you’ll notice is the screen: the radio now tells you more, faster, and more clearly while you’re actually using it. The game-changer: a real signal strength readout on-screen (approx dBm) For the first time on the BF-F8HP PRO, and a first-of-its-kind feature in the Baofeng-style handheld world for a lot of...

Category: Blog, NewsTags: , , , , Comments: 10

BTECH Unveils UV-50PRO: Revolutionizing Mobile Ham Radio

Friday,  November 21, 2025 ARLINGTON, SD – BTECH today unveiled the UV-50PRO, a transformative 50W dual-band mobile amateur radio that redefines what's possible in connected communication. Drawing inspiration from the compact brilliance of our UV-PRO handheld, the UV-50PRO amplifies it with vehicle-optimized power, AI-driven enhancements, and space-ready features like automatic satellite tracking. This isn't merely an upgrade, it's a complete rethinking of mobile ham radio, integrating effortless Bluetooth app control, real-time APRS tracking, and intelligent noise reduction into a rugged, future-proof...

Category: Blog, NewsTags: , , , , , , , Comments: 4

Meet the BL-5RHL: The Extended Battery Built for the Way You Actually Use Your Radio

This week, BTECH quietly dropped a game-changer for anyone who relies on their handheld: the BL-5RHL 5200mAh Extended USB-C Battery Pack. On paper, it looks like a simple upgrade — a bigger battery that doubles your runtime. But there’s more going on here than just raw milliamp-hours. The BL-5RHL signals where handheld radio power is heading: longer operation, smarter charging, and fewer compromises in the field. If you’ve ever worked a long deployment, operated off-grid, or pulled an all-day event shift, you...

Category: Blog, NewsTags: , , , , , Comments: 3