BTECH UV-2501+220 Tri Band (VHF / 1.25M (220Mhz) / UHF) Analog MOBILE Two-Way Radio
Free FAST Shipping*
Generation 3 Updates
The 3rd Gen. BTECH mobiles focus on significant hardware updates. The UV-2501+220 update includes a built-in external temperature cooling fan and an exclusive updated board which provides unmatched performance compared to any transceiver in its class - focusing on refined audio clarity, selectivity, and filtering. The firmware has also been updated with user adjustable DTMF Gain and Mic Gain. Power toggling is now selectable right on the keypad.
What Makes it Unique?
Audio-Out Jack Included Update from the UV-2501.
Synchronize Display Mode
Scrambler/Inversion, DTMF, 5Tone, 2Tone, CTCSS, and DCS Calling Modes (Remote Kill/Stun Supported)
A new easy programming user's guide
Menus, Programming, and Reset Lockout
Auto Power Off Function
Dual Watch Delay Time: Allows the receiver to stay on the secondary channel longer after incoming transmission - customize the delay up to 50 seconds; This avoids manually channel switching when you are engaged with simultaneous contacts on two frequencies
Pair the UV-2501+220 with the with the Nagoya TB-320A Antenna Tri-Band Antenna (and RB-35 NMO mount) for easy installation with the UHF antenna connectors.
The PC04 FTDI Cable is recommended for easier computer programming
The UV-2501+220 provides extended receiver and transmitter coverage of 136-174Mhz, 210-230Mhz, and 400-520Mhz (beyond the Amateur bands), so you can keep informed of communication activities in the public safety, commercial, and government communications ranges. TX/RX on Narrowband (12.5kHz) or Wideband (25kHz).
The UV-2501 operates as two radios in one, with either 144 MHz, 220, or 430 MHz as the "Main" TX/RX band, while simultaneously watching the other band. And, if you like, you can configure your UV-2501 for VHF-VHF or UHF-UHF operation, too!
For those that want to have the most information at their fingertips on a specific channel - they can synchronize the displays. You can configure the displays to synchronize and allow both the Channel Name and frequency to simultaneously display on the selected channel.
To get your message through when it counts, the UV-2501+220 puts out up to 25 Watts of power on the VHF band, and up to 20 Watts on UHF and 220Mhz Bands. Power can be switched between High and Low via the microphone keypad.
You can listen to the FM Broadcast radio, while still monitoring your radio frequencies in the background. Any incoming call will be given priority insuring you never miss an important call while listening to the radio.
The UV-2501+220 supports the most common Analog Tones. It supports CTCSS, DCS, 2Tone, 5Tone, Voice Inversion, and DTMF calling methods. Set-up your calling methods to call by group tones. Tone calling (private line) is required by most repeater applications and the UV-2501+220 supports the latest standards.
The UV-2501+220 can even send DTMF tones. This allows for sending ANI (Caller ID) or remote commands that require DTMF tones; or it can receive incoming DTMF tones to allow for remote stun or kill commands
You can program your UV-2501+220 exactly how you want it. There are 200 programmable memory channels. You can add or remove channels from scanning list. You can give channels alphanumeric names. The radio has an available low power setting of 10 watts, allowing you to choose how far you can communicate. You can easily program from a PC to set-up the radio to operate exactly as needed. (The PC04 FTDI Cable is recommended for easy programming)
BTECH UV-2501+220 Mobile
Mounting Bracket and Hardware
Remote Speaker Mic and Mic Bracket
Inline Fuse and DC Connectors
25KHz/12.5KHz Switchable (Wide/Narrow Band)
FM Radio (65.0MHz-108.0MHz)
Large Tri-color LCD Display (3 Selectable Colors)
High /Low RF Power Switchable
50 CTCSS/ 104 DCS Tones
Voice Inversion (Scrambling) Support
Transmitter time-out timer(TOT)
Busy channel lock-out(BCLO)
[TX] 136 - 174MHz, 210 - 230MHz, 400 - 520MHz
[RX] 136 - 174MHz, 210 - 230MHz, 400 - 520MHz, 68-108MHz (FM Broadcast)
25KHz (wide band)12.5KHz (narrow band)
≤0.25μV (wide band) ≤0.35μV (narrow band)
13.6V DC ±20%
Antenna Connector: SO-239
2M: 25W (Peak), 20W (AVG) / 10W
1.25M: 20W (Peak) 15W (AVG) / 7W
70CM: 20W (Peak) 15W (AVG) / 7W
Audio Power Output
Replacement Microphone: UV‐25X2, Uv-25X4, UV-50X2$16.46
Also Compatible: Gen. 1/Gen. 2
Works on Similar Radios
Add to Cart