gmrs

GMRS-RPT50 Firmware V1.023R Now Available

Thursday, March 19, 2026 ARLINGTON, SD - BTECH today announced the release of Firmware V1.023R for the GMRS-RPT50 bringing a focused set of refinements that improve day-to-day repeater operation, display accuracy, and update clarity. This release releases primarily addresses a modulated hum heard with CTCSS tones in certain unique setups, corrects per-channel low/high power display behavior, and aligns the firmware on the repeater to display the actual version number.  Built on the V1.021R relaunched foundation These updates build on the major usability...

Category: Blog, NewsTags: , , , , Comments: 3

GMRS-RPT50 Firmware V1.021R Now Available: Reverse CTCSS for Cleaner Dropouts, Faster On-Site Setup

Tuesday, February 10, 2026 ARLINGTON, SD - BTECH today announced the release of Firmware V1.021R for the GMRS-RPT50, delivering a major refinement to on-air behavior and day-to-day usability. The update is led by a new Reverse CTCSS (Reverse Burst TX) option designed to reduce squelch tail noise at the end of transmissions, along with a reorganized front-panel menu system, improved on-screen feedback, and a redesigned CPS programming experience. Repeaters should sound clean and set up fast. Firmware V1.021R focuses on the moments...

Category: Blog, NewsTags: , , , , Comments: 0

GMRS-50PRO Firmware Changelog

This page lists official GMRS-50PRO radio firmware releases in reverse chronological order. Update tip: After flashing, if the screen does not power back on: unplug the radio from power → Press and hold the Menu button (the top left white button) → While holding the Menu button, reconnect power and turn the radio on (after releasing the reset will take about 1 minute). This will reflash the display firmware and restore normal operation. Best practice: After major updates, back up your...

Category: Blog, NewsTags: , , , Comments: 0

GMRS-PRO Firmware Changelog

This page lists official GMRS-PRO radio firmware releases in reverse chronological order. Update tip: After flashing, if the screen does not power back on, power off → hold OK (top-left green key) → power on to initialize the new firmware. Best practice: After major updates, back up your channels, then perform a Factory Reset and re-sync using the BTECH GMRS Programmer app. V0.9.2 — January 29, 2026 New Radio Settings Update: Added a Reverse Frequency switch in Radio Settings. Programmable Buttons: New assignable actions: Squelch Level +, Squelch Level −,...

Category: Blog, NewsTags: , , , Comments: 0

Introducing the BTECH GMRS-50PRO: 50 Watts of Smart, Rugged GMRS Power

Wednesday,  April 23, 2025 ARLINGTON, SD – BTECH proudly announces the arrival of the GMRS-50PRO, a 50-watt, IP54-weatherproof base/mobile radio that marries smartphone-style intelligence with the brute strength radio professionals demand. Packed with cable-free Bluetooth programming, on-board GPS navigation, and automatic NOAA weather alerts, the GMRS-50PRO is purpose-built for the real-world challenges faced by overlanders pushing remote trails, ranchers coordinating sprawling acreage, emergency crews staging storm response, and families who simply can’t afford dead air when it matters most. By fusing...

Category: Blog, NewsTags: , , , , , Comments: 5

BTECH Releases Firmware 0.8.3 for GMRS-PRO and UV-PRO, Introducing a Sun-Friendly Display and NOAA Alert Fixes

Monday,  April 7, 2025 ARLINGTON, SD – If you own a GMRS-PRO or UV-PRO from BTECH, the new 0.8.3 firmware update is worth your attention and comes packed with fixes and improvements. One of the biggest highlights is the UV-PRO’s refreshed display, which is much easier to read in direct sunlight. Both radios also get a fix for a stubborn receive problem that showed up when NOAA alerts were enabled. This bug sometimes caused weaker reception and odd scanning behavior. It’s...

Category: Blog, NewsTags: , , , , , , Comments: 9

Introducing the New GMRS-RPT50 Firmware 1.008R

Wednesday, February 26, 2025 ARLINGTON, SD – BTECH is proud to unveil Firmware 1.008R for the GMRS-RPT50—a transformative update that redefines what you can expect from a GMRS repeater. Designed with direct feedback from our community and built for the demands of modern communication, Firmware 1.008R adds new layers of versatility, performance, and user-friendliness. At BTECH, we’re not just about keeping up—we’re about pushing forward. The GMRS-RPT50 is already one of the most feature-rich and reliable GMRS repeaters on the market, but...

Category: Blog, NewsTags: , , , Comments: 0

BTECH Releases Firmware 0.8.0 for GMRS-PRO and UV-PRO, Introducing Bluetooth VOX for Hands-Free Operation

Wednesday, January 29, 2025 ARLINGTON, SD – BTECH is proud to announce the release of Firmware 0.8.0 for its popular GMRS-PRO and UV-PRO radios, delivering groundbreaking enhancements that elevate both convenience and capability for radio enthusiasts and professionals. Chief among these updates is the all-new Bluetooth VOX functionality, allowing operators to seamlessly transmit hands-free with any Bluetooth headset—no special accessory required. Bluetooth VOX: A Leap Forward in Hands-Free Communication The hallmark feature of Firmware 0.8.0 is the Bluetooth VOX (Voice-Operated Exchange) integration, which...

Category: Blog, NewsTags: , , , , , , Comments: 21

How-To CSV Import Channels for the GMRS-PRO & UV-PRO

This is a comprehensive tutorial that walks you through creating, importing, and exporting channel lists for both the GMRS-PRO and UV-PRO radios. These steps are valid for the radios’ companion apps on iOS and Android. Overview Both the GMRS-PRO and UV-PRO share a similar firmware foundation and mobile app interface, making the channel-import process nearly identical. Here are the main differences: GMRS-PRO Focused on FRS/GMRS frequencies (462–467 MHz) Anything outside the core GMRS range must be configured as “RX Only” UV-PRO Supports transmit...

Category: BlogTags: , , , , , , , , Comments: 23

June 2024 – GMRS-RPT50 Firmware Update

🚀 Exciting News for GMRS-RPT50 Owners! 🚀 We’re excited to announce the release of the latest firmware update for the BTECH GMRS-RPT50 GMRS repeater! Introducing Firmware V1.003R. At BTECH, we’re dedicated to innovation and durability. Our mission is to provide you with products that improve over time. The GMRS-RPT50 continues to evolve, bringing you fresh features and robust improvements that make a real difference. 🌟 First, download the firmware file for the GMRS-RPT50 from the User Manual and CPS Software Tab at: <a...</a...

Category: BlogTags: , , , , Comments: 6