Baofeng Tech is the only authorized USA Baofeng Distributor to honor the Manufacturer Warranty. Only Baofeng Tech offers warranty claims without shipping anything to China. You must insure that Baofeng Tech is your selected buying option when buying to be able to have the full USA warranty
The UV-82HP Adds More than Just 8 Watt Power Output
Dual or Single Push-to-Talk Selectable
The UV-82 Series come with a dual push-to-talk button. The dual PTT allows you to transmit on two frequencies by the use of the rocker push-to-talk switch. By pressing 'up' you can transmit on 'Frequency A' and by pushing down you can transmit on 'Frequency B'.
Frequency A or B can also be used as a scanner of channels, frequencies, CTCSS and DTS tones.
Note: The BaoFeng UV-82HP allows you to synchronize the PTT button to re-enable a single Push-to-Talk switch. This simplifies the use for those who require only one frequency to talk on.
See the Full Comparison Chart
The UV-82HP is a major update to the previous UV-82 model with firmware, hardware, and even packing upgrades (including a US Based Warranty program and support manual).
There are a variety of BaoFengs models in existence, but generally no differences exist. Some models are even re-manufactured units.
No matter the model number BaoFeng radios are based on one of these chipsets.
The UV-82HP is a upgrade from the UV-82 and UV-5R series with the addition of features, power levels, and the updated chipset revision that supports the High Power.
The UV-82HP also includes: External Accessory Compatibility, FM Radio, Flashlight, Emergency Alarm.
The UV-82HP has one built-in receiver but can 'watch' two channels/frequencies (semi duplex). The UV-82HP will monitor both frequencies giving priority to the first station to receive an incoming call.
The UV-82HP supports CTCSS, DCS, and DTMF calling methods. Tone calling (private line) is required by most repeater applications and the UV-82HP supports the latest standards.
The UV-82HP can send DTMF tones. This allows for sending ANI (Caller ID) or remote commands that require DTMF tones.
The UV-82HP is able to Transmit on Narrowband (12.5kHz) and Wideband (25kHz).
BaoFeng UV-82 Series Radio
The UV-82 series is BaoFeng's most commercialized radio series. Compared to the UV-5R and other previous series; the UV-82 radios come with a much louder speaker (1 watt), while other current BaoFeng radios use a 700mW speaker.
The UV-82 series radios also have a more solid case that employ larger buttons as well compared to the previous BaoFeng series. The UV-82HP uses the latest BaoFeng chipset and PCB board that outperforms the range, accuracy, and output of the previous BaoFeng chipsets.
It is not simply a remake but a new radio from the ground up.
|Features||UV-82HP, High Power||UV-82C, Commercial||UV-5X3, Tribander Model||BF-F8HP (8W), High Power + (3rd Gen)||BF-F8+ Variants, (2nd Gen)||UV-5R & Variants (2nd Gen)|
|Output||7 Watt Max||5 Watt Max||5 Watt Max||8 Watt Max||4-5 Watt Max||4-5 Watt Max|
|Speaker Output||1 Watt||1 Watt||1 Watt||700mW||700mW||700mW|
|Frequency Range (mhz)||VHF, UHF||VHF , UHF||VHF, 1.25M, UHF||VHF, UHF||VHF, UHF||VHF, UHF|
|Push-to-Talk: Single, Dual, or Both||Both||Both||Single||Single||Single||Single|
|Disable VFO (Frequency)||✔||✔||✔|
|Compared to UV-5R and UV-5RA||Completely Upgraded||Completely Upgraded||Completely Upgraded||Upgraded Power and Features||Display is Inverted||Original|
|FCC Part 90 Licensed and Compliant for Commercial Applications||✔|
|BaoFeng Tech Concierge Support||✔||✔||✔||✔|
BaoFeng UV-82HP Additional Information
- Output power: 7W / 5W / 1W
- Selectable Dual or Single Push-to-Talk
- Frequency (VFO) Lockout Option
- Battery: 1800 mAh
- 128 User Channels
- Frequency step: 2.5, 5, 6.25, 10, 12.5, 20, 25, 30 and 50KHz
- Channel Spacing: 25KHz (wide band) or 12.5KHz (narrow band)
- Antenna Connector: SMA-Female
- Accessory Connector: Kenwood 2 Pin Standard
- Speaker Audio Output: 1000mW (1 watt)