Skip to content

Signaling

EXPLORE A TOPIC

Signaling guides & updates.

Find BTECH instructions, news, and field knowledge related to Signaling.

LATEST FROM BTECH

Latest guides, updates & news.

Clear answers, firmware releases, product announcements, and practical radio help.

DTMF Decode settings 1

DTMF REMOTE COMMANDS ON THE UV-5X3

(REQUIRES CHIRP SOFTWARE & A PROGRAMMING CABLE) INTRODUCTION: BRIEF DTMF COMMANDS EXPLANATION Any Radio with DTMF Ability can be used to send Remote Commands to a UV-5X3. For illustration purposes, and as an introduction to the function, we will explain this feature by using 2 UV-5X3s. The UV-5X3 is capable to listening for Over-the-Air (OTA) DTMF tones and responding with a variety of remote commands. BASIC DESCRIPTIONS: REMOTE COMMANDS Inspection Code: When this command is received the radio will respond with its ANI (Automatic Number Identification)....

Category: Guides & How-TosTags: , Comments: 3
Settings

BTECH-2Tone-converted

1,First write the above needed 2Tone parameters into your radio. To enable your 2Tone settings - set the above RED mark parameters in Optional functions. Upload back to the radio – To transmit press the “CALL” key, and your 2 tone has been sent, the status indicator light will flicker when the receiver receives 2 tone signals. When the transmitting radio sends a 2Tone signal call, the receiver’s (Radio for RX) squelch will be opened. After 15 seconds (The above...

Category: Guides & How-TosTags: , , , , , , , , , Comments: 1