V0.9.3 — June 2026

New

• Preset DTMF Commands: Added support for preset DTMF commands for quicker tone dialing.
• Main Channel Display: The main channel can now show both the channel name and frequency at the same time.
• Network Receive Display: When receiving through the network, the radio now displays the bound network channel name.
• Bandwidth Control: Added a bandwidth modification option under Radio Settings.
• Narrowband Indicator: Channels using narrowband now display an “N” indicator in the status bar.
• Launch Timeout Warning: Added a prompt tone 5 seconds before launch timeout.
• Auto-Shutdown: Added an auto-shutdown option under General Settings.
• Microphone Gain Range: Increased the available adjustment range for microphone gain.
• GMT+14 Time Zone: Added time zone support for GMT+14.
• DTMF Modulation Alignment: Unified DTMF transmission modulation between the mobile app and radio.
• Message Thread Display: Added support for displaying multiple messages from the same teammate. This also allows multiple APRS messages from the same source, such as WXBOT, to be viewed.

Fixes

• KISS Transmission Interruption: Fixed an issue where KISS transmission could be interrupted.
• Single-Channel Receive Return: Fixed an issue where, after transmitting on a specific channel while listening to only one channel, the receiving frequency might not return to the current channel.
• iOS Region Name Cleanup: Fixed an issue on iOS where renaming a region with a shorter name could leave trailing characters from the old name.

V0.9.2 — January 29, 2026

New

• KISS Mode Enhancements: Configure TX and RX frequencies independently, and set TX power for the KISS profile.
• Smart Beacon Control: Added Max Interval under General Settings → Digital Mode to set the maximum smart beacon transmit interval.
• Radio Settings Update: Added a Reverse Frequency switch in Radio Settings.
• Programmable Buttons: New assignable actions: Squelch Level +, Squelch Level −, Display Squelch Level, VFO Toggle, Reverse Frequency Toggle.

Improvements

• Satellite Mode Display Batching: Screen updates are now batched to prevent flickering.
• DTMF Display: When transmitting DTMF, the radio now displays the characters being sent.
• Audio Relay is Added to the on-board radio Menu

Fixes

• Satellite Mode Audio Link: Fixed an issue where voice communication between the radio and phone could be blocked after a PTT transmission.
• Boot “Last Received Channel” Indicator: Prevents the “last received channel” indicator from showing during boot by initializing it as invalid at startup.

V0.9.0 — December 17, 2025

Fixes

• Fixed MIC-E Parsing Errors Caused by Overflows

V0.8.15 — December 03, 2025

New

• GPWPL Location Reporting: Adds support for reporting received position reports using GPWPL. (Requires enabling “GPWPL Upload” under: General Settings → Data Mode → GPWPL Upload. Signaling format selector in Signaling Settings (choose BSS or APRS)).

Improvements

• Satellite Mode Enhancements: Now displays satellite name, azimuth, elevation, orbital altitude, range to satellite, and pass countdown timer on-screen.
• Keypad Lock Behavior: The radio now restores the previous key lock state after powering back on, ensuring front panel behavior is consistent between uses.
• Mute Status Indicators: The mute icon now distinguishes between different mute conditions (e.g., manual mute, squelch, other system mutes) for clearer status feedback.

Fixes

• KISS / TNC Data: Supports sending KISS data packets when the squelch (SQ) is open, improving compatibility with external packet/APRS software.

V0.8.12 — October 09, 2025

New

• Signaling format selector in Signaling Settings (choose BSS or APRS).
• Custom Location override for cases without GPS or when a fixed position is preferred.

Improvements

• BK4819 RF driver hardening: added host-write error detection and automatic recovery on PLL loss-of-lock.
• Refined display communication validation to reduce false “Communication Error” reports.

Fixes

• APRS Mic-E: default icon set now applies when no icon is configured in the app, preventing malformed/incorrect packets.
• Audio Relay: resolved occasional silent transmit due to audio re-sampling.
• Network channel binding status now displays correctly.